Infotainment operation
Infotainment operation
Operation principles and screen areas
Fig. 144 Infotainment Columbus, Amundsen, Bolero: Screen areas/ screen
display
Fig. 145 Infotainment Swing: Screen areas / screen display
Screen display description
» Fig. 144
Status line with time and outdoor temperature data and other information
A
Information and the operation of the current menu
B
Function surfaces of the current menu
C
Identification of the current menu
D
Return to the higher-level menu
E
Sliding regulator
F
116
Infotainment
and
» Fig.
145.
Menu item with "Checkbox"
G
▶
- Function is switched on
▶
- Function is switched off
/ Open a sub menu of the menu item with the "pop-up window"
H
Function surfaces
The screen areas which confirm a function or a menu are called "function sur-
faces".
▶
White text - the surface is active and thus selectable
▶
Grey text - the surface is inactive and therefore not selectable
▶
Green frame - currently selected surface
Selecting menu/menu item/function
▶
By moving your finger across the screen in the desired direction (applies to
Infotainment Columbus, Amundsen, Bolero).
▶
By tapping on the function surface or
Swing).
▶
By turning the knob .
Confirm menu/menu item/function
▶
By tapping on the function surface.
▶
By pressing the knob .
Returning to higher-level menu
▶
By tapping on the function surface .
▶
By tapping on the screen outside of the "pop-up window".
▶
By pressing the corresponding button next to the screen (e.g. in the menu
Media, by pressing the
button).
Select the menu item / function value
▶
- Selected menu item / function value
▶
- Deselected menu item / function value
Set value
▶
By pressing the function surface with one of the following symbols
.
▶
By touching or moving your finger over the scale.
▶
Turning the knob .
Note
Depending on the equipment fitted, Infotainment can be operated using the
buttons on the multifunction steering wheel. Further information
» Fig. 145
(Applies to Infotainment
» page
43.