›
Push the wheel wrench through the clamp, support on the tyre and pull off
the wheel trim.
Install trim
›
Press the wheel trim onto the wheel rim at the designated valve opening.
›
Then press the trim into the wheel rim until its entire circumference locks
correctly in place.
The position of the anti-theft wheel bolt is indicated by means of a symbol on
the back of the wheel trim supplied ex-factory or from the ŠKODA Original Ac-
cessories. If using the anti-theft wheel bolt, it should be fitted at this point
»
.
WARNING
We recommend that you use hub caps from ŠKODA Original Accessories. A
sufficient air supply may not be able to be guaranteed with other wheel
trims to cool the braking system - there is a risk of an accident.
CAUTION
If the wheel trim is positioned outside the position marked for the anti-theft
■
wheel bolt, there is a risk of damaging the wheel cover.
Only use manual pressure and do not hit the full wheel trim – there is a risk
■
of damaging the trim.
Note
We recommend that you use hub caps from ŠKODA Original Accessories.
Wheel bolts
›
To remove the cap insert the extraction pliers as far as they will go on the
cap and pulling them out in the direction of arrow
›
To install, insert the cap onto the wheel bolt as far as it will go.
268
Do-it-yourself
Fig. 304
Remove the cap
» Fig.
304.
Anti-theft wheel bolts
The anti-theft wheel bolts protect the wheels from theft. This can only be
.with the
attachment» Fig. 305
B
›
Insert the attachment
» Fig.
B
bolt
.
A
›
Insert the key as far as it will go onto attachment
wheel bolt.
›
Remove the attachment.
The attachment for the anti-theft wheel bolts must always be kept in the ve-
hicle in case of a possible wheel change!
For wheel trims supplied ex-factory or from ŠKODA Original Accessories, the
anti-theft wheel bolt should be installed in the position marked on the back of
the wheel trim.
Note
The attachment and the anti-theft wheel bolts are provided with a code num-
ber. A replacement attachment can be ordered from ŠKODA Genuine Accesso-
ries using this.
Fig. 305
Anti-theft wheel bolt and attach-
ment
loosened / tightened.
305as far as it will go on the anti-theft wheel
and loosen / tighten the
B