Voice Control - Skoda Octavia Owner's Manual

The configuration wizard is automatically displayed if there are at least two
non-selected menu items after turning on Infotainment, or if a new personali-
sation user account is selected.
Deactivate the automatic display of the Configuration wizard by tapping the
function surface Don´t show again.
›
To manually display in Infotainment Columbus, Amundsen, Bolero, press the
button , then tap on the function surface  → Configuration wizard.

›
For manual displayin Infotainment Swing, press the
function surface Configuration wizard.
The Configuration wizard allows you to set the following menu items in se-
quence.
Identification of personalisation user account

Time and date format (valid for Infotainment Columbus, Amundsen, Bo-

lero)
Time format (applies to Infotainment Swing)

Date format (applies to Infotainment Swing)

Storing the radio stations with the currently strongest reception signal

in the first memory group of each individual broadcast area
Pairing and connecting a phone to Infotainment

Home address (applies to Infotainment Columbus, Amundsen)

The selected menu item provided is with the symbol  .
Menu items which can be set by tapping on the respective function surface in
the » Fig. 149 » Fig. 150 area.
A
Fig. 150
Infotainment Swing: Configura-
tion wizard
button, then tap the

Operating using an application in the external device
Applies to Infotainment Columbus, Amundsen.
Some Infotainment functions can be operated using an application in the sup-
ported external device.
›
Activate data transfer in Infotainment. To do this, press
Tap→ Mobile device data transfer → Activate data transfer for ŠKODA Apps.
›
Release Infotainment operation using the application. To do this, press
and then  Tap→ Mobile device data transfer → Use apps to operate:: → con-

firm/Allow.
›
Connect Infotainment to an external device via
›
In the external device, install an application for Infotainment operation (e.g.
Start ŠKODA Media Command).
Note
The description of Infotainment operation ŠKODA Media Command is part of
the application.

Voice control

Introduction to the subject
Applies to Infotainment Columbus, Amundsen, Bolero.
The navigation, telephone, radio and media menu can be operated by voice
commands.
The voice control system can be used either by the driver or by the front pas-
senger.
Function requirements for voice control
Infotainment is switched on.

There will be no telephone call using a phone connected to Infotainment.

The parking aid is not active.

Requirements for optimum voice command recognition
▶
Speak at your normal volume without intonation and long pauses.
▶
Avoid bad pronunciation.
▶
Close the doors and windows in order to avoid disturbing environmental in-
fluences on the function of the voice commands.
and then 

WLAN» page 163.

119
Infotainment operation