Skoda Octavia Owner's Manual page 179

Switching on / off of the split screen display
D
Switching on/ off of the selected POI categories display
E
map point
If the map scale of the 2D Map or 3D Map is greater than 10 km (5 miles), then
the map is automatically displayed as 2D and aligned in the direction of north.
If the scale is increased beyond this value, then the map is switched back to
the original representation.
Map scale
It is possible to change the map scale manually or to turn on the automatic
change of scale.
Symbols of the scale function surfaces
In the map area » Fig. 213 the following context-dependent function surfa-
A
ces and information is displayed.
Current elevation

Map view in reduced scale

Size of the manually set map scale

 Size of the automatically set map scale
Switch on/off the automatic change of scale

Manual change of scale
Map scale can be changed in the following ways.
▶
Turning the control knob  Turn.
▶
Touching the screen with two fingers and pulling them apart or closing them
together.
Enabling automatic scaling
▶
In the Navigation main menu, tap on the function surface  →  .
» page 171
» page 176, Tap
Fig. 213
Function surfaces for the map
scale change
Tap on the function surface  is highlighted in green.
The automatic scale is only active as long as the map is centred on the vehicle
position (the function surface  or.  is hidden).
If the automatic scale is active, the map scale will change automatically de-
pending on the type of roads travelled (motorway - smaller map scale / town
larger map scale) and from the manoeuvre to be carried out.
Turn off the automatic change of scale
▶
In the Navigation main menu, tap on the function surface  →  .
Tap on the function surface  is highlighted in white.
The turning off occurs likewise when the map is moved or the map scale is
changed manually.
Map view in reduced scale
▶
In the Navigation main menu, tap on the function surface  →  or.  →
 .
The map scale is reduced for a few seconds and then restored.
Change map orientation
Changing map orientation is possible under the following conditions.
The map is in the 2D display.

The map is centred (the function surface /  is hidden).

The map scale is max. 10 km away.

With a larger map scale than 10 km, the map is automatically oriented towards
north.
A change of map orientation is only possible in the 2D display when the map is
centred on the vehicle position (the function surface  or.  is hidden
» page 178, Map alignment).
Fig. 214
Change the map orientation
177
Navigation
