Check Proper Fitting - Skoda Octavia Owner's Manual

Assembling the bar ball – Step 2
Fig. 275 Lock lock: Key Version 1 / key Version 2

Read and observe on page 230 first.
Applies to the key version 1
›
Turn key in the direction of arrow
A
upwards » Fig. 275.
›
Remove the key in the direction of the arrow
Applies to key version 2
›
Turn the key in the direction of arrow
B
points down » Fig. 275.
›
Remove the key in the direction of the arrow
Applies to both key versions
›
Fit and press cap onto the lock in the direction of arrow
C
›
Check that the ball rod is securely attached
Fig. 276
Place cap on the lock
so that the green marking is pointing
1
.
2
so that the conclusions release
3
.
4
» Fig. 276.
5
» page

233, Check proper fitting.

WARNING
After fitting the tow bar, always secure the lock and remove the key. The
tow bar must not be operated with the key inserted.
Check proper fitting

Read and observe on page 230 first.
Correctly secured ball rod » Fig. 277
The ball rod does not come off the mounting recess even after strong

"shaking".
Operating lever is as far up as possible.
A

The release pin is completely exposed (both its red and green parts are
B

visible).
The key is removed and the cap

Removing the bar ball – Step 1
Fig. 277
Correctly connected tow bar
attached to the lock.
C
Fig. 278
Remove the cap from the lock
Towing device and trailer

233