Skoda Octavia Owner's Manual page 126

Voice control settings
›
Press the button, then tap on the function surface  Tap→ Voice control .

Example commands (infotainment system) - Switch on/off the menus containing ba-
■
sic voice commands when voice control is activated
■ Voice control session start tone - Switch on/off the audible signal when turning on
the voice control
Voice control session end tone - Switch on/off the audible signal when voice con-
■
trol ends
Input tone in voice dialogue - Switch on/off the audible signal for the voice input
■
End tone in voice dialogue - Switch on/off the audible signal for the voice input
■
Safe removal of the external device
›
Press the button, then tap on the function surface  → Remove safely

and select the external device to be removed.
Reset to factory settings
›
Press the button, then tap on the function surface  → Factory settings.

In this menu, all or only chosen settings can be restored.
®
Bluetooth Settings
›
Press the button, then tap on the function surface  Tap on→ Bluetooth.

■ Bluetooth - Switch on/off Bluetooth
Visibility: - Switch on/off the visibility of the Bluetooth
■
devices
■ Name: - Changing the name of the Bluetooth
Paired devices - Display the list of coupled Bluetooth
■
Find devices - Searches for available Bluetooth
■
■ Bluetooth audio (A2DP/AVRCP) - Turn on/off the ability to connect a Bluetooth
audio device (e.g. MP3 player, tablet etc...)
Wireless settings
Applies to Infotainment Columbus, Amundsen.
›
Press the button, then tap on the function surface  Tap on→ WLAN.

124
Infotainment
®
function
®
device for Bluetooth
®
unit
®
Devices
®
devices
■ WLAN - List of available hotspots of external devices
WLAN - Turn on / off Infotainment wireless
■
WPS quick connection (WPS button) - Establishing a secure connection to the
■
hotspot of the external device using WPS (applies to Infotainment Amund-
sen)
Manual settings - Setting the parameters for search and connection to the
■
hotspot of the external device
Network name - Enter the Hotspot name
■
Network key - Setting the access password
■
■ Security level: - Sets the security
WPA2 - WPA2 security
■
WPA - WPA security
■
No security level - No coverage (without required entry of the access pass-
■
word)
Connect - Connection establishment
■
Search - Search / Restore the list of available hotspots
■
Mobile hotspot - Setting Infotainment hotspot (in the functional surface the
■
symbol  displayed with the number of connected external devices)
Mobile hotspot - Switching on / off Infotainment hotspot
■
WPS quick connection (WPS button) - Establishing a secure connection to the In-
■
fotainment hotspot via WPS (applies to Amundsen)
Hotspot (WLAN) settings - Setting the parameters for the connection to Info-
■
tainment hotspot
■ Security level: - Sets the connection security
WPA2 - WPA2 security
■
WPA - WPA security
■
■ No security level - No coverage (without required entry of the access pass-
word)
®
Network key - Entering the access password
■
■ SSID: ... - Name of the Infotainment hotspot
Do not send network name (SSID) -Turn Infotainment hotspot visibility on/off
■
Store - Storage of Infotainment hotspot parameters
■
®
Settings
Applies to Infotainment Columbus with SIM card inserted in external module.
›
Press the button, then tap on the function surface  → Network.

Network settings - Setting of the data connection from the associated tele-
■
phone service provider (APN settings)
Access point name: ... - Setting of the access point name
■
User name: ... - Setting of user name
■ 