Media Command
Operation
Introduction to the subject
Applies to Infotainment Amundsen.
The Media Commandfunction allows playback of audio files or videos in up to
two TabletsThat are connected to Infotainment via WLAN, to control Infotain-
ment.
The function Media Command enables operation of tablets with the Android
operating system or iOS.
Connect tablet with Infotainment
›
Turn on the Infotainment hotspot (WLAN) (press the button
function surface Tap on→ WLAN → Mobile hotspot → Mobile hotspot).
›
Switch on Wi-Fi in the tablet.
›
Establishing a Wi-Fi connection in the tablet
›
In the tablet, start the application ŠKODA Media Command.
CAUTION
If several devices are connected to Infotainment via WLAN, there is a risk that
the quality of the WLAN connection, and therefore the function of Media
Command may be affected.
Main Menu - Connected to a tablet
›
to display the main menu Media Command press the button
function surface Tap.
then the
» page
163, Hotspot (WLAN).
Fig. 172
Main menu: a tablet connected
, then the
Main menu
» Fig. 172
Information on playing track
A
Playback timeline with a slider
B
Tablet name
C
Playback control
D
Increase / decrease the tablet volume
Selection of the playback source
WLAN settings
Main Menu - two tablets connected
Fig. 173 Main menu: two tablets connected / use one of the two connec-
ted tablets
›
to display the main menu Media Command press the button
function surface Tap.
›
To initiate operation of the tablet, the function surface Tap on each tablet
» Fig. 173
- .
›
To return to the main menu, the function surface Tap
Main menu
» Fig. 173
Name of the first tablet
A
Name of the second tablet
B
Playback control
C
Information on playing track
D
Playback timeline with a slider
E
Name of the tablet being operated
F
Increase / decrease the tablet volume
Selection of the playback source
, then the
on» Fig. 173
-.
147
Media Command