SecurityPhone.book 40 ページ 2004年7月21日 水曜日 午後6時58分
Checking the Current Status
Display Status
You can display faulted zones and a current system status, using this feature.
Refer to "Checking For Open Zones" on page 14 in the 3000EN Security Systems
User's Guide.
Make sure all perimeter doors and windows are closed and
displayed.
Base Unit
1
Press [ADT].
2
Scroll to "STATUS REQUEST" by pressing [d]
or [B], then press [g].
• The current status of the phone is displayed for
10 seconds.
Press [STOP] to go to the standby mode.
3
Handset
: Press the soft key (
cordless handset. Press [OFF] to go to the standby mode.
40
g
), and follow step 2 above, using the
ADT
is
READY
STATUS REQUEST