Schedules - Panasonic K10059 User Manual

SecurityPhone.book 35 ページ ２００４年７月２１日 水曜日 午後６時５８分
Handset
: Press the soft key (
page, and enter the user number of 2 digits, using the cordless handset.
Press the soft key (
OK
key ( ), then press [OFF] to go to the standby mode.
OK

Schedules

Refer to "Scheduling" on pages 35 to 36 in the 3000EN Security Systems User's Guide.
Base Unit
1 Press [ADT].
Scroll to "OTHER FUNCTIONS" by pressing [d]
2
or [B], then press [g].
Scroll to "SCHEDULES" by pressing [d] or [B],
3
then press [g].
Enter your security code.
4
• The schedule number is displayed.
• If you entered the wrong security code, the phone
will go back to step 2. Try again from step 2.
Enter the schedule number (01 to 16), then
5
press [*].
(Ex. Schedule number is "10".)
• To quit this mode, press [0] [0], then [STOP].
), follow steps 2 to 5 on the previous
ADT
). Follow step 7 on the previous page. Press the soft
Schedules
OTHER FUNCTIONS
g
SCHEDULES
g
ENTER CODE
----
Enter Sched No.
00=Quit 0 0
|
Example
Enter Sched No.
00=Quit 10
10 Enter Event
Clear Event 00
(continued)
35