Table of Contents
Advertisement
SecurityPhone.book 15 ページ ２００４年７月２１日 水曜日 午後６時５８分
Press [g] (ENTER).
6
• The "Bypass" message for bypassed zone number
is displayed momentarily.
• A confirmation tone (one beep) is heard for each
bypassed zone.
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 4 or wrong
zone number in step 5, or the security mode is
armed. The setting is not saved. Try again from
step 3.
Press [STOP] to go to the standby mode.
7
Handset
: Press the soft key (
previous page, using the cordless handset. Press the soft key (
press [OFF] to go to the standby mode.
Bypassing Protection Zones
), and follow steps 2 to 5 on the
ADT
), then
OK
15
Advertisement
Chapters
Table of Contents
