Rf User Number; Rf User Number - Panasonic K10059 User Manual

SecurityPhone.book 32 ページ ２００４年７月２１日 水曜日 午後６時５８分
Security Codes & Authority Levels

RF User Number

If you enroll a wireless button device (keyfob) in system, you need to set the zone
number for the device.
Refer to "RF User Number" on page 31 in the 3000EN Security Systems User's Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and
displayed.
Base Unit
Press [ADT].
1
Scroll to "OTHER FUNCTIONS" by pressing [d]
2
or [B], then press [g].
Scroll to "USER CODES" by pressing [d] or [B],
3
then press [g].
Scroll to "RF USER NUMBER" by pressing [d]
4
or [B], then press [g].
Enter your security code.
5
Enter the user number of 2 digits, then press
6
[g] (ENTER).
(Ex. To select user number 8, enter "08".)
7 Enter the zone number of 2 digits.
(Ex. To select zone number 8, enter "08".)
Press [g] (ENTER).
8
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved.
Try again from step 4.
Press [STOP] to go to the standby mode.
9
32
is
READY
OTHER FUNCTIONS
g
USER CODES
g

RF USER NUMBER

g
ENTER CODE
----
Enter User #
-,-
Example
Enter User #
0,8
=ENTER
READY
g
Enter Zone #
--
Example
Enter Zone #
08
=ENTER
READY
g