Panasonic K10059 User Manual page 21

SecurityPhone.book 21 ページ ２００４年７月２１日 水曜日 午後６時５８分
To stop and clear a burglary alarm
1 Enter the security code.
• If the system is armed, the system is disarmed.
• Alarm stops.
Press [ADT].
2
3 Enter your security code, then press [1].
• Alarm display will be cleared.
• " " will be displayed.
READY
Press [STOP] to go to the standby mode.
4
IMPORTANT:
If you return and the main burglary sounder is on, DO NOT ENTER, but
CONTACT THE POLICE from a nearby safe location.
If you return after an alarm has occurred and the main sounder has shut itself
off, the touchpad will beep rapidly upon your entering, indicating that an alarm
has occurred during your absence and an intruder may still be on the premises.
LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location.
To stop and clear a medical alarm
Enter the security code.
1
• If the system is armed, the system is disarmed.
• Alarm stops.
Press [ADT].
2
Enter your security code, then press [1].
3
• Alarm display will be cleared.
• " " will be displayed.
READY
4 Press [STOP] to go to the standby mode.
PANIC Keys
21