Authority Level; Authority Level - Panasonic K10059 User Manual

SecurityPhone.book 28 ページ ２００４年７月２１日 水曜日 午後６時５８分
Security Codes & Authority Levels

Authority Level

You can set the authority level to the selected user.
You can select four authority levels, "Standard User", "Arm only", "Guest" and
"Duress" through the AUTHORITY LEVEL menu.
Refer to "Authority Level Definitions" on page 30 in the 3000EN Security Systems
User's Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and
displayed.
Ex. To assign the "Guest" level to the user of a user
number "08"
Base Unit
Press [ADT].
1
Scroll to "OTHER FUNCTIONS" by pressing [d]
2
or [B], then press [g].
Scroll to "USER CODES" by pressing [d] or [B],
3
then press [g].
Scroll to "AUTHORITY LEVEL" by pressing [d]
4
or [B], then press [g].
Enter the security code for system master.
5
Enter the user number of 2 digits, then press
6
[g] (ENTER).
(Ex. To select user number 8, enter "08".)
7 Select the desired authority level by pressing
[d] or [B].
28
is
READY
OTHER FUNCTIONS
g
USER CODES
g

AUTHORITY LEVEL

g
ENTER CODE
----
Enter User #
-,-
Example
Enter User #
0,8
=ENTER
READY
g
Enter Auth. Lvl
:Standard User
=ENTER
READY
g
Enter Auth. Lvl
:Guest
=ENTER
READY
g