Selecting The Function; (Macro); Other Functions A-Dfunctions; Function A - Panasonic K10059 User Manual

SecurityPhone.book 23 ページ ２００４年７月２１日 水曜日 午後６時５８分
Selecting the Function (Macro)
If a series of commands (up to 16 keystrokes) are programmed in the system's
memory by your installer and the commands are assigned to the "A", "B", "C" and
"D" keys on a touchpad, you can operate the desired function by selecting
"FUNCTION A", "FUNCTION B", "FUNCTION C" or "FUNCTION D" through the
function menu.
Refer to "Macro Key Programming & Usage" on pages 25 to 26 in the 3000EN
Security Systems User's Guide.
Make sure all perimeter doors and windows are closed and
displayed.
Base Unit
Press [ADT].
1
Scroll to "OTHER FUNCTIONS" by pressing [d]
2
or [B], then press [g].
Press [g] at "FUNCTIONS A-D".
3
Scroll to the desired function key by pressing
4
[d] or [B].
5 Press [g] at your desired selection.
• The function which you set to the function key is
performed.
Handset
: Press the soft key (
the cordless handset. Press [OFF] to go to the standby mode.
g
g
g
), and follow steps 2 to 5 above, using
ADT
is
READY
OTHER FUNCTIONS
FUNCTIONS A-D

FUNCTION A

23