Arming The System - Panasonic K10059 User Manual

SecurityPhone.book 7 ページ ２００４年７月２１日 水曜日 午後６時５８分

Arming the System

You can set the security mode through the function menu using the base unit or
handset. There are 4 modes, AWAY, STAY, Night-Stay and INSTANT.
If you want to change the security mode after you arm the system, disarm the
system, then set your required mode through the function menu.
Before arming the system, refer to the section "Entry/Exit Delays" on pages 12 to 13
and "Arming the System" on page 15 in the 3000EN Security Systems User's Guide.
Make sure all perimeter doors and windows are closed and is
READY
displayed.
• If protected windows and doors are opened when the system is armed:
— the phone alarms and a conversation or a call is disconnected, or an incoming
call is disconnected after you press [TALK] or the speakerphones to answer.
7