3.7 Checking the Line Status
3.7 Checking the Line Status
You can check the status of each line (KX-HDV130: up to 2 lines, KX-HDV230: up to 6 lines) on the display.
In Standby Mode
1.
Press
.
Menu
2.
Press [▲] or [▼] to select "Line Status", and then press
3.
Press [▲] or [▼] to select the line whose status you want to check.
4.
Press /
CANCEL
Note
•
When a function key is assigned as a Line Status key, you can press that function key to display the
line status screen.
During a Conversation
1.
Press
.
Line
2.
Press [▲] or [▼] to select the line whose status you want to check.
3.
Press /
CANCEL
Note
•
When a function key is assigned as a Line Status key, you can press that function key to display the
line status screen.
Line status indication
Status Display
Free
*1
<n> Free
*1
In Use (KX-HDV230 only)
Line On Hold
*2
Incoming Call (KX-HDV230
only)
*2
Recall (KX-HDV230 only)
<x> In Use
*3
<x> Line On Hold
The following icons are also displayed if the corresponding feature is enabled.
*1
Icon
66
Operating Instructions
to end checking the line status or press
to end checking the line status or press
The line is idle.
A shared line is idle.
The line is on a call.
The line is on hold.
The line is receiving a call.
The line is receiving a Hold Recall
*2
signal.
A shared line is in use at another unit.
A shared line is on hold at another unit.
*3
Call Forwarding
Do Not Disturb
Making an anonymous call
.
OK
to perform an action.
OK
to perform an action.
OK
Meaning
Meaning
Action
Seize the line for dialing.
Seize the line for dialing.
—
Retrieve the call on hold.
Answer the call.
Answer the call.
Join the call.
Retrieve the call on hold.
Document Version: 2017-08