Direct Commands - Panasonic K10059 User Manual

SecurityPhone.book 42 ページ ２００４年７月２１日 水曜日 午後６時５８分

Direct Commands

You can set the security mode using a security code and direct command. Confirm
with your installer or refer to the 3000EN Security Systems User's Guide for available
direct commands.
While the security system is armed, you can not use this function. To
turn on, disarm the security system (p. 12).
Base Unit
Press [ADT].
1
Enter your security code.
2
Enter the number of the desired commands.
3
• If the security mode is armed, the "DISARM" is
displayed at first.
Example of direct commands
[3] : STAY mode
[7] : INSTANT mode
Handset
: Press the soft key (
• If "Quick Arming" is programmed by the installer, you can arm the system by
pressing [#] instead of entering your security code.
42
[3] [3] : Night-Stay mode
[2] : AWAY mode
), and follow steps 2 and 3 above.
ADT
Example
ARM
g