SecurityPhone.book 31 ページ 2004年7月21日 水曜日 午後6時58分
Security Codes & Authority Levels
Press [STOP] to go to the standby mode.
9
Handset
: Press the soft key (
), follow steps 2 to 5 on the previous
ADT
page, and enter the user number of 2 digits, using the cordless handset.
Press the soft key (
). Follow step 7 on the previous page. Press the soft
OK
key (
), then press [OFF] to go to the standby mode.
OK
• Enter a correct security code and user number in steps 5 and 6. Otherwise the
system will not function properly.
31