Chime Mode - Panasonic K10059 User Manual

SecurityPhone.book 17 ページ ２００４年７月２１日 水曜日 午後６時５８分

Chime Mode

Even if the security system is not armed, the Chime mode can alert you by three
beeps and announcement to the opening of a perimeter door or window.
Refer to "Chime Mode" on page 22 in the 3000EN Security Systems User's Guide.
While the security system is armed, you can not turn the Chime on or off. To
turn on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and
displayed.
Base Unit
Press [ADT].
1
Scroll to "CHIME ON/OFF" by pressing [d] or
2
[B], then press [g].
Enter your security code.
3
• If the Chime was turned on, the mode changes to
off. If the Chime was turned off, the mode changes
to on.
• If you entered the wrong security code, a
confirmation tone (one beep) is not heard and the
phone will go back to the previous display. The
setting is not saved. Try again from step 2.
Press [STOP] to go to the standby mode.
4
Handset
: Press the soft key (
using the cordless handset. Press [OFF] to go to the standby mode.
• If an opening of a protected door or window occurs when the Chime mode is on,
the phone will stop the operation and go into the Chime mode.
The following operations that will stop include:
— programming the function menu
— searching an item in the caller list, phone book or redial list
— recording/playing back a greeting message
— playing back messages
— making an intercom
— copying phone book
— re-registering the cordless handset
• If an opening of a protected door or window occurs when the Chime mode is on,
beeps sound and a conversation using a phone is disconnected temporarily.
• To confirm the Chime mode setting, press [ADT] in the standby mode. The
"CHIME" message will be displayed when the security system is disarmed, and
the Chime mode is turned on.
g
ENTER CODE
), and follow steps 2 and 3 above,
ADT
is
READY
CHIME ON/OFF
----
17