Disarming The Security; System - Panasonic K10059 User Manual

SecurityPhone.book 12 ページ ２００４年７月２１日 水曜日 午後６時５８分
Disarming the security system
To disarm the security system through the function menu
You can disarm the system by turning the security mode off through the function
menu.
Base Unit
Press [ADT].
1
Press [g] at "DISARM".
2
Enter your security code.
3
• If you entered the wrong security code, the phone
will go back to the previous display. Try again from
step 2.
Press [STOP] to go to the standby mode.
4
Handset
: Press the soft key (
the cordless handset. Press [OFF] to go to the standby mode.
To disarm the security system using the security code
and [1]
When the unit is in the standby mode:
Press [ADT].
1
Enter your security code, then press [1].
2
• The security system is disarmed.
3 Press [STOP] to go to the standby mode.
When slow or fast beeps sound while the system is armed:
Enter your security code.
1
• Beeps stop and the security system is disarmed.
12
g
ENTER CODE
), and follow steps 2 to 3 above, using
ADT
DISARM
----