Bypassing Protection Zones; Bypassing Zones; Bypass(Normal) - Panasonic K10059 User Manual

SecurityPhone.book 14 ページ ２００４年７月２１日 水曜日 午後６時５８分

Bypassing Protection Zones

Using this mode, you can set the selected zones to be unprotected. After setting
this mode, set the security mode as desired.
While the security system is armed, you can not set the Bypass. To bypass
zones, disarm the security system (p. 12).
• WHEN CERTAIN ZONES ARE BYPASSED, THE SYSTEM DOES NOT
PROTECT THE BYPASSED ZONE, THE ALARM DOES NOT SOUND, AND AN
ALARM SIGNAL IS NOT SENT TO THE CUSTOMER MONITORING CENTER.
• You can not set fire zones to be bypassed.
• When the system is disarmed, bypassed zones automatically is unbypassed.
Make sure all perimeter doors and windows are closed and
displayed.

Bypassing zones

You can select the protection zones.
Refer to "Using the BYPASS key" on page 20 in the 3000EN Security Systems User's
Guide.
Base Unit
Press [ADT].
1
Scroll to "BYPASS" by pressing [d] or [B], then
2
press [g].
3 Press [g] at "BYPASS(NORMAL)".
4 Enter your security code.
5 Enter the desired zone number of 2 digits.
(Ex. To set zone 1 unprotected, enter "01".)
• You can enter four zone numbers at one time. To
enter over four zone numbers, repeat from the
step 3 after pressing [g]
14
(ENTER).
is
READY
BYPASS
g

BYPASS(NORMAL)

g
ENTER CODE
----
ENTER ZONES
--,--,--,--,
Example
ENTER ZONES
--,--,--,01,
=ENTER
READY
g