Transport Motor Stop Failure - Lexmark W850n Service Manual

Step
3 Perform a print test.
Does the error still occur?

910.00 Transport motor stop failure

Step
1 Check the dual drive motor assembly installation.
Is the dual drive motor assembly properly installed?
Open the rear motor cover, and check it.
2 Check the dual drive motor assembly rotation operation.
Open the rear motor cover and check it.
1. Enter Diagnostics mode.
2. Select MOTOR TESTS.
3. Select Transport motor.
Does the motor rotate normally?
3 Check the dual drive motor assembly connection.
Is the dual drive motor assembly properly connected?
4 Perform a print test.
Does the error continue?
Check
Check
Yes
Replace the Problem solved.
printer engine card
assembly.
Go to "Printer
engine card
assembly
removal" on
page 4-119.
Yes
Go to step 2. Install the PC
cartridge properly.
Go to step 4. Go to step 3.
Replace the dual Replace the
drive motor connection.
assembly.
Replace the Problem solved.
printer engine card
assembly.
Go to "Printer
engine card
assembly
removal" on
page 4-119.
Diagnostic information
4024-110
Previous
No
Next
Go Back
No
2-47