Lexmark W850n Service Manual page 33

Error code or
Error contents
message
287.03 Sensor (upper media exit) on
jam C
Paper jam
Check area
G1
287.04 Sensor (upper media exit) off
jam B
Paper jam
Check area G
287.05 Sensor (upper media exit)
Static jam A
Paper jam
Check area F
287.06 Sensor (upper media exit)
Static jam B
Paper jam
Check areas
G1, G3
287.07 Sensor (upper media exit)
Static jam C
Paper jam
Check area
G1
288.00 Sensor (diverter gate) on jam
Paper jam
Check area F
288.01 Sensor (diverter gate) Static
jam (to top bin) A
Paper jam
Check area F
288.02 Sensor (diverter gate) Static
jam (to top bin) B
Paper jam
Check areas
G2, G3
288.03 Sensor (diverter gate) Static
jam (to top bin) C
Paper jam
Check area
G1
Description/Action
Sensor (upper media exit) is not turned on within the
specified time after the sensor (finisher media
entrance) is turned on.
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to Finisher Service Manual.
Sensor (upper media exit) is not turned off within the
specified time after the sensor (upper media exit) is
turned off.
At this time, the sensor (bridge unit media exit) is
turned off.
Refer to Finisher Service Manual.
Paper remains on the sensor (upper media exit).
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (upper media exit).
At this time, the sensor (bridge unit media exit) is off
state but the finisher sensor (finisher media
entrance) is turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (upper media exit).
At this time, both sensor (bridge unit media exit) and
sensor (finisher media entrance) are turned off.
Refer to Finisher Service Manual.
Sensor (diverter gate) is not turned on within the
specified time after the sensor (bridge unit media
exit) is turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the upper bin exit mode.
At this time the sensor (bridge unit media exit) is
turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the upper bin exit mode.
At this time, the sensor (finisher media entrance) is
turned on, but the sensor (bridge unit media exit) is
turned off.
Refer to Finisher Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the upper bin exit mode.
At this time, both sensor (finisher media entrance)
and sensor (bridge unit media exit) are turned off.
Refer to Finisher Service Manual.
Diagnostic information
4024-110
Previous
Next
Go Back
2-11