Sensor (Exit 1 Media Shift) Removal - Lexmark W850n Service Manual

4024-110

Sensor (exit 1 media shift) removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover.
3.
Remove the top rear cover. See
4.
Open the printer left door assembly.
5.
Remove the standard exit top cover. See
6.
Open the printer front door assembly.
7.
Remove the front left cover. See
8.
Remove the exit 1 media shift assembly. See
9.
Remove the media shift motor. See
10.
Remove the two screws securing the bracket (A) to the exit 1 media shift assembly (B).
11.
Remove the bracket (A).
12.
Release the hooks securing the sensor (exit 1 media shift) (C) to the bracket (A).
13.
Remove the sensor (exit 1media shift) (C).
4-108
Printer Service Manual
"Rear RIP card cover removal" on page
"Top rear cover removal" on page
"Standard exit 1 top cover removal" on page
"Printer front left cover removal" on page
"Media shift motor removal" on page
C
Hooks
Hook
A
4-4.
"Exit 1 media shift assembly removal" on page
B
4-125.
4-112.
4-3.
4-104.
4-107.
Left
Previous
Next
Go Back