Lexmark W850n Service Manual page 131

Diagnostics mode tests (continued)
HARDWARE TESTS
Panel Test
Button Test
DRAM Test
CACHE Test
DUPLEX TESTS (if installed)
Quick Test
Sensor Test
INPUT TRAY TESTS
Feed Tests
Sensor Test
OUTPUT BIN TESTS
Feed Tests
Feed To All Bins
Sensor Test
FINISHER TESTS (if installed)
Staple Test
Feed Tests
Sensor Test
BASE SENSOR TEST
Cover and Door
Devices
Exit Level
Media Path
DEVICE TESTS
Quick Disk Test (if installed)
Disk Test/Clean (if installed)
Flash Test (if installed)
PRINTER SETUP
Defaults
Page Count
Perm Page Count
Serial Number
Engine Setting 1 through 16
Model Name
Configuration ID
Edge to Edge
EVENT LOG
Display Log
Print Log
Clear Log
REPORTS
EXIT DIAGNOSTICS
See "Panel Test" on page 3-6.
See "Button Test" on page
See "DRAM Test" on page
See "Quick Test (duplex)" on page
See "Sensor Test (duplex)" on page
See "Feed Tests (input tray)" on page
See "Sensor Test (input tray)" on page
See "Feed Tests (output bins)" on page
See "Feed To All Bins" on page
See "Sensor Test (output bin)" on page
See "Staple Test" on page
See "Feed Tests" on page
See "Sensor Test (finisher)" on page
See "BASE SENSOR TEST" on page
See "Quick Disk Test" on page
See "Disk Test/Clean" on page
See "Flash Test" on page 3-15.
See "Defaults" on page 3-15.
See "Page Count" on page
See "Perm Page Count (permanent page count)" on page
See "Serial Number" on page
See "Engine Setting 1 through 16" on page
See "Model Name" on page
See "Configuration ID" on page
See "Edge to Edge" on page
See "Display Log" on page
See "Print Log" on page 3-17.
See "Clear Log" on page 3-18.
Prints Menu Settings Page.
3-6.
3-7.
3-8.
3-8.
3-9.
3-9.
3-10.
3-10.
3-10.
3-11.
3-11.
3-12.
3-13.
3-14.
3-14.
3-15.
3-16.
3-16.
3-16.
3-16.
3-16.
3-17.
Diagnostic aids
4024-110
Previous
Next
Go Back
3-15.
3-3