Lexmark W850n Service Manual page 28

4024-110
Error code or
message
230.00
Paper jam
Check areas
A, E
230.01
Paper jam
Check area D
231.00
Paper jam
Check areas
A, D
231.01
Paper jam
Check areas
A, D
241.00
Paper Jam
Check area,
tray 1
241.01
Paper jam
Check areas
A, tray 1
242.00
Paper jam
Check area
tray 2
242.01
Paper jam
Check area B,
tray 2
242.02
Paper jam
Check area B
242.03
Paper jam
Check area B
243.00
Paper jam
Check area 3
2-6
Printer Service Manual
Error contents
Sensor (duplex wait) on jam
sensor (duplex wait) static
jam
Sensor (registration) on jam
(duplex media feed)
Sensor (registration) on jam
(duplex media feed)
Sensor (pre-feed) on jam
(tray 1 feed)
Sensor (registration) on
jam (tray 1 feed)
Sensor (pre-feed) on jam
(tray 2 feed)
Sensor (tray 2 feed-out) on
jam (tray 2 feed)
Sensor (registration) on
jam (tray 2 feed)
Sensor (tray 2 feed-out)
static jam
Sensor (pre-feed) on jam
(tray 3 media feed)
Description/Action
The sensor (duplex wait) is not turned on within the
specified time after the exit2 motor is turned on.
Refer to Options Service Manual.
Media remains on the sensor (duplex wait).
Refer to Options Service Manual.
Sensor (registration) is not turned on within the
specified time after the duplex motor is turned on.
Refer to Options Service Manual.
Sensor (registration) is not turned on within the
specified time after the sensor (duplex wait) is
turned on.
Refer to Options Service Manual.
The sensor (pre-feed) tray 1 is not turned on within
the specified time after the tray 1 media feed lift
motor is turned on.
Go to "241.00 Sensor (pre-feed) on jam (tray 1
feed)" on page 2-32.
The sensor (registration) is not turned on within the
specified time after the sensor (pre-feed) media
feed unit 1 is turned on.
Go to "241.01 Sensor (registration) on jam (tray 1
feed)" on page 2-33.
The sensor (pre-feed) tray 2 is not turned on within
the specified time after the tray 2 media feed lift
motor is turned on.
Go to "242.00 Sensor (pre-feed) on jam (tray 2
feed)" on page 2-34.
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (pre-feed) media
feed unit 2 is turned on.
Go to "242.01 Sensor (tray 2 feed-out) on jam
(tray 2 feed)" on page 2-36.
The sensor (registration) is not turned on within the
specified time after the sensor (tray 2 feed-out) is
turned on.
Go to "242.02 Sensor (registration) on jam (tray 2
feed)" on page 2-38.
Media remains on the sensor (tray 2 feed-out).
Go to "242.03 Sensor (tray 2 feed-out) static jam"
on page 2-39.
The sensor (pre-feed) is not turned on within the
specified time after the tray 3 feed lift motor is
turned on.
Refer to Options Service Manual.
Previous
Next
Go Back