W850dn
Conscientious Material
Selection
Energy Saving
Paper Saving
Toner Saving
Waste Minimizing
(Non paper waste)
Lexmark W850n and W850dn
Monochrome Laser Printer
Design for Environment
This Lexmark product offers the following resource conserving
features:
Power Saver
– Reduces the power state of the printer after printing – adjustable from
2-240 minutes
Eco-Mode
– Conserves energy and paper through three optional settings:
Energy Saving Mode: Operator panel backlight and advance paper start are
disabled and the fuser is not continually heated
Paper Saving Mode: Device defaults to duplex printing (W850dn only)
Energy + Paper Saving Mode: Energy and paper saving settings are activated
(W850dn only)
Quiet Mode
– Reduces noise emission by adjusting print speed, disabling advanced
paper start, disabling or minimizing beeps (key press, alarms, etc.), and adjusting fan
speed (Quiet mode may be combined with Eco-Mode)
Multi-Page Printing
– Prints multiple page images on one page
Duplex
– Prints on both sides of a page (W850dn only)
Recycled Paper
– Supports the use of recycled content media
Forms Card Option
– Eliminates stocking paper forms
Print and Hold
– Holds print jobs until released by the user at the printer interface by
entering a pin number (Hard drive option needed)
Toner Darkness Control
High Yield Toner Cartridges
materials used per printed page
– Adjusts the print darkness to conserve toner
– More toner per cartridge reduces the energy and
Need help?
Do you have a question about the W850n and is the answer not in the manual?
Questions and answers