Mpf Media Out Actuator Removal - Lexmark T650 Service Manual

5. Remove the MPF lift plate assembly.
Replacement Warning: When replacing the MPF lift plate assembly, ensure that the lever (C) is held down
when reinstalling the MPF lift plate assembly, or damage will occur.
Replacement Warning: When replacing the MPF lift plate assembly, ensure that the MPF pick solenoid
assembly does not become damaged.

MPF media out actuator removal

1. Remove the media turn guide. Go to
2. Gently unsnap the MPF media out actuator from the machine.
3. Remove the media out actuator.
MPF pick roll assembly removal
1. Remove the media turn guide. Go to
2. Remove the E-clip (A) securing the MPF print roll assembly to the machine.
3. Remove the plastic washer (B).
4. Remove the MPF pick roll assembly.
Replacement Warning: When replacing the MPF pick roll assembly, do not touch the rubber surface.
"Media turn guide removal" on page
"Media turn guide removal" on page
B A
4062-XXX
4-35.
4-35.
4-37
Repair Information
Previous
Next
Go Back