Table of Contents
Advertisement
WAB–3000 Wireless Access Point
Basic Features
The WAB–3000 is housed in a sturdy case which is not meant to be
opened except by an authorized technician for maintenance or repair.
If you wish to reset to factory settings, use the reset function available
through the GUI-based management module.
The WAB–3000 is wall-mountable.
It has the following features:
• Ethernet uplink WAN port
• Local Ethernet LAN port (for configuration only)
• Wireless VLAN
• Wireless AP with operating range of 2000+ feet
• Wireless Bridge
• Power over Ethernet (PoE)
• Above average temperature range for extreme environments
(with TEC option)
• WEP encryption or WPA/WPA2/AES-CCM with TKIP
• HTTPS/TLS secure Web
• DHCP client
• Adjustable Radio Power
• MAC address filtering
• Load Balancing
• Rogue AP Detection
The following security modules have been implemented in the WAB–
3000 .
• WEP
• WPA/WPA2
• AES–CCM
Wireless Basics
Wireless networking uses electromagnetic radio frequency waves to
transmit and receive data. Communication occurs by establishing radio
links between the wireless access point and devices configured to be part
of the WLAN.
2
Chapter 1: Introduction
29000171-001 A
Advertisement
Table of Contents
