3. Hardware Installation
Front View
1) WLAN Button/ WPS Button
Press and hold for 3 seconds to turn the Wireless LAN on or off.
Please confirm WLAN status as indicated by WLAN Light
It is also Wi-Fi Protected Setup push button. Press and hold for 1 seconds to activate WPS pairing
with wireless client when WLAN is on.
2) Status
A steady blinking light indicates the device is ready
3) WAN
A solid light indicates the WAN port is connected.
4) WLAN Light
A solid light indicates the Wireless LAN is turned on and ready for use.
Off indicates Wireless LAN is turned off.
LED blinks during wireless data transmission.
Steady blinking indicates WPS function is activated and the router is pairing with wireless client.
5) LAN Lights
A solid light indicates to an Ethernet enable computer on ports 1 ~ 4.
LED blinks during data transmission.
7