Cli: Ping Or Link Tests - ProCurve 6200yl Management And Configuration Manual

Basic Ping
Operation
Ping with
Repetitions
Ping with
Repetitions
and Timeout
Ping Failure
Figure C-16. Examples of Ping Tests
N o t e
Number of Packets to Send is the number of times you want the switch to
attempt to test a connection.
Timeout in Seconds is the number of seconds to allow per attempt to test a
connection before determining that the current attempt has failed.
To halt a Link or Ping test before it concludes, click on the Stop button.
To reset the screen to its default settings, click on the Defaults button.

CLI: Ping or Link Tests

Ping Tests. You can issue single or multiple ping tests with varying repeti-
tions and timeout periods. The defaults and ranges are:
Repetitions: 1 (1 - 999)
■
Timeout: 5 seconds (1 - 256 seconds)
■
Syntax: ping < ip-address > [repetitions < 1 - 999 >] [timeout < 1 - 256 >]
To halt a ping test before it concludes, press
To use the ping (or traceroute) command with host names or fully qualified
domain names, refer to "DNS Resolver" on page C-49.
Troubleshooting
Diagnostic Tools
.
[Ctrl] [C]
C-47