ProCurve 6200yl Management And Configuration Manual page 194

Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 9-1. The System Information Screen (Default Values)
9-6
2. Press (for ). The cursor moves to the
[E] Edit
Use [v] to move the cursor to the
3.
4. Use the Space bar to select
to the field.
SNTP Mode
5. Do one of the following:
• Use the Space bar to select the
move the cursor to the
Broadcast mode details, refer to "SNTP Operating Modes" on
page 9-2.)
Figure 9-2. Time Configuration Fields for SNTP with Broadcast Mode
• Use the Space bar to select the
following:
Time Protocol Selection Parameter
– TIMEP
– SNTP
– None
System Name
Time Sync Method
, then press [v] once to display and move
SNTP
Broadcast mode, then press
field, and go to step 6. (For
Poll Interval
mode, then do the
Unicast
field.
field.
[v]
to