Figure 5-31 Adding A Panel - PESA Cougar 3 User Manual

configuration screen. If you are adding a new panel to the listing, the graphic image of the panel
is displayed once the panel type parameter is selected. Displaying a graphic image allows you to
verify the panel type as well as provide a visual cue of the features and functions of the specific
panel.
•
Enter Panel Configuration Data
Panel ID – Enter the hardware ID number assigned to the panel in the Panel ID column.
-
This is a unique number assigned to each remote control panel in the system as set by rotary
switches on the rear of each PNet control panel.
Name – This entry allows you to assign a name to each panel. If you are adding a new
-
panel, the place-holder name entered by Cattrax will initially appear in this column. You
may change the name to a more descriptive panel name if you wish. A panel name may
consist of a mix of alphanumeric characters. This is the text string displayed in other
configuration and status screens to identify the panel.
Type – This column allows you to select the panel type using a pull-down menu of all
-
PESA PNet panel model numbers. Click in the Type cell and open the pull-down menu.
Select the model number of the panel you are installing and click the entry. The model
number appears in the cell and a graphic image of the panel is displayed on the
configuration screen.
IP Address – Each PNet panel must be a assigned a valid IP address that is compatible with
-
the facility network. In most cases, IP addresses are issued by the facility network
administrator. Enter the IP address of the panel in this column.
Proprietary Information of PESA
Figure 5-31 Adding a Panel Configuration
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
5-46