Figure 2-6 - Typical Cougar3 Closed Loop Installation; Figure 2-7 Typical Cougar3 Network Installation - PESA Cougar 3 User Manual

Depending on the application, Cougar3 system components can communicate over an Ethernet interface
configured as a closed Ethernet communication loop established directly between devices through an
Ethernet switch; or Ethernet communication may be established over the facility network.
Figure 2-6 pictorially illustrates a Cougar3 system interconnected through a closed Ethernet
communication loop established using the supplied Ethernet switch device. In this application, no
component of the router installation is connected to the facility network. Figure 2-7 illustrates the same
components in a network installation. In this application, every router component can be directly
connected to the network, and use of the Ethernet switch is optional.
Input
Signals
Ethernet Connector
Cables for all System
PNet Control Panels
Proprietary Information of PESA

Figure 2-6 - Typical Cougar3 Closed Loop Installation

Local Control Panel
PNe
323
t
2
Cougar3 Video
Router Frame
Signals
Local Panel
SSC3 Module
Ethernet
Ethernet Port
Port
Standard CAT-5
Interconnects

Figure 2-7 Typical Cougar3 Network Installation

Output
Ethernet Switch
TAKE
PRESE
T
PRO T./
LOCK
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
Host
Computer
Running
Cattrax GUI
Application
Facility Network
PRESE
T
R
IDEO OUTER
March 2011
TAKE
PROT./
LOCK
2-5