Switching Levels Status - PESA Cougar 3 User Manual

•
Button Dark (No Backlight) - Indicates there is no source group defined for the button.
•
Steady Lit Source Button - Indicates the source group definition is applied to all switching
levels.
•
Blinking Source Button – If none of the Level pushbuttons are illuminated, a blinking source
button identifies the source group currently selected on the switching level defined as status
level for the panel, and indicates the switching levels are in a breakaway condition – meaning
the source selected on one or more of the switching levels is different than the displayed source.
Selecting any of the level buttons displays the source currently selected for that switching level -
see Switching Levels Status, below.
•
Sources Buttons 1 and 2 Blinking Simultaneously – This condition indicates a
communications error between the PNet panel and the system controller.
4.9.3 S L
WITCHING
Switching LEVEL buttons select the levels for breakaway switching and level status display with the
panel operating in either Hot-Take or Preset modes. Each button is a push-on/push-off toggle function,
and is illuminated when the level is selected. Any levels button that is not backlit indicates there is no
switching level defined for the button.
•
No Levels Selected – Indicates panel is operating in All-Levels Switch mode, and any Source
button you press will select that source on all switching levels of the source group.
For status tally, when no levels buttons are lit, the illuminated Source button indicates source
group currently selected on switching level defined as status level for the panel.
•
One or More Levels Selected – Indicates panel is operating in Breakaway Switch mode, and
selects switching levels for the breakaway switch. Any Source button you press selects that
source on selected switching levels of the source group.
Pressing any one of the level buttons selects that switching level for status display and the
corresponding illuminated Source button indicates the currently selected source for the
switching level.
If multiple Levels buttons are selected (lit), the illuminated Source button ALWAYS displays
status of the numerically lowest selected switching level. A blinking Source button indicates the
switching levels are in a breakaway condition – meaning the source selected on one or more of
the selected switching levels is different than that of the currently displayed level.
Remember, when no levels buttons are brightly lit, the illuminated Source button always
indicates source group currently selected on the switching level defined as status level for the
panel.
Proprietary Information of PESA
S
EVELS TATUS
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
4-8