PESA Cougar 3 User Manual page 73

C 3 V R
OUGAR IDEO OUTER
Publication 81-9059-0660-0, Rev. B
March 2011
Click the cursor in the single cell corresponding to the destination and level, or to selected
multiple destination cells you wish to map to a sync reference. Right click and select the
"Set Sync Reference" option from the menu. A window, as shown in the diagram below,
displays identifying the level and current destination you are configuring at the top. In the
middle of the window you assign a sync source to the destination using the pull-down menu
boxes.
Three radio buttons allow you to assign the sync source to only the Current Destination, All
Destinations or Selected Destinations. Choose the Selected Destinations option when
multiple cells have been highlighted.
In the example shown, by selecting "Set Sync Reference" in the spreadsheet cell for VTR 1
on the Video level, the window below appears and shows VTR 1 on the VIDEO level as the
current destination. By selecting SYNC1 from the pull-down we have assigned the physical
output named VTR 1 on the VIDEO level to synchronize to the reference input named
SYNC1 for the current destination only.
5-38
Proprietary Information of PESA