PESA Cougar 3 User Manual page 68

The numeric entries for source group IN2 in the columns corresponding to switching level
AUDIO 1 and AUDIO 2 are 3 and 4, respectively. In this case, the numeric entries indicate that
the audio signal associated with switching level AUDIO 1 is the signal present at physical input
number 3 of the DRS audio router frame, and the signal associated with AUDIO 2 is physically
present at input 4 of the audio router.
When you select source group IN2 as the source for a router destination, the physical inputs for
all switching levels associated with the source group are switched simultaneously to the
physical outputs for all switching levels associated with the destination group.
Only one source entry per switching level is allowed. A level may be left undefined on a source
group entry. Inputs may be shared between different source groups.
For reference, the Source Configuration screen shown in Figure 5-24 displays the source groups
and level source assignments programmed into the pre-installed controller configuration file.
•
Navigating the Sources Spreadsheet - From the Sources Configuration screen, you may view
all assigned source groups, add a single source group or a range of groups to the configuration,
delete a source or modify parameters of an existing source group.
Add Source – If you wish to add a single source group entry, use the scroll bar and move
-
the display to the empty row beneath the last source entry in the spreadsheet. Click the
cursor in the Name cell on the empty row and begin typing the name of the source group
you wish to add. Press enter, and the next sequential index number is automatically
assigned to the source entry and the name you entered is copied in all three of the name
entry cells. If you wish to change any of the name entries, such as panel name or long name,
click the cursor in the cell you wish to modify and enter the changes, followed by enter.
Once the new source is entered, you may click the cursor in a switching level cell and enter
the physical router input you wish to assign to the source for that level. You may continue
adding single sources in this manner up to the maximum number of allowable sources for
the controller.
Delete Source – If you wish to remove a source group entry from the configuration
-
spreadsheet, move the cursor to the number column of the source row you wish to delete
and right click. Select delete from the right click menu. You will be prompted to verify the
action before the source is removed.
Spreadsheet Right Mouse Click Functions - When you right-click on any cell in the
-
Source Configuration Spreadsheet, a pop-up menu will appear providing command options
for the cell, as shown below. Command items appearing in the pop-up menu will vary
depending on which commands are pertinent for data entered in the selected cell. Paragraph
5-14 discusses the function of common commands available from the pop-up menu.
Remember that all commands listed and discussed below may or may not appear in the pop-
up menu for a specific cell.
Proprietary Information of PESA
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
5-33