PESA Cougar 3 User Manual page 61

C 3 V R
OUGAR IDEO OUTER
Publication 81-9059-0660-0, Rev. B
March 2011
Auto Increment Block
Auto Increment Block is very similar to the Auto Increment function, the difference being that it allows
the fill block to consist of multiple switching level columns, as shown by the diagram. Auto increment
block always uses the field in the upper left corner of the fill block as the starting value entry, and fills
successive fields with numerical values, incremented by a value of one, from left to right and top to
bottom. The Auto Increment Block function will only add numerical values if every line of the fill block
already has a name, such as assigned to a source or destination, associated with the level.
Numerical values filled in the switching level columns will be incremented by one up to the maximum
number of physical inputs or outputs defined for the level in the starting entry field. If the fill block
contains additional fields after any field in the block reaches the maximum number, any successive
fields in the remainder of the fill block will be filled with zeros.
Auto Increment Block Function
Fill-Down
Fill-Down fills in the fields below a selected field with the selected number. First, select the field with
the number you want to duplicate and then, select the fields below it. Right-click and select Fill-Down
to fill in the fields with the selected number, as shown.
Fill-Down Command
Fill-Up
Fill-Up fills in fields above a selected field with the same information. First, select the field with the
number you want to duplicate and then, select the fields above it. Right-click and select Fill-Up to fill in
the fields with the selected information, as shown by the diagram.
Fill-Up Command
5-26
Proprietary Information of PESA