Panels Configuration Screen; Figure 5-30 Panelsc - PESA Cougar 3 User Manual

For any key you wish to assign, highlight the key # row. You can do this either by clicking in
the cell or by mouse clicking on button number on the graphic image. With the row highlighted,
select the entry from the active scroll menu box you wish to associate with the key and double
click the entry. The function type and name assigned to the key are automatically entered in the
list fields.
5.15.9 P C
ANELS ONFIGURATION
The Panels Configuration Screen, Figure 5-30, allows you to add PNet control panels to the system,
program the functionality of each panel, and review the configuration of existing panels. Clicking on
the Panels parent entry in the SSC3 Configuration menu brings up the panels configuration screen.
•
Adding a Control Panel –To add a PNet control panel, click the Add button at the bottom of
the Panel Name list box. A place-holder name is added to the list name box; however, it may be
changed through the configuration set-up entries. Choosing the Add function also creates a data
entry row in the panel configuration box for you to enter set-up data for the new panel.
•
Deleting a Data Key List - To delete a control panel, locate the name of the panel you wish to
delete in the Panel Name box and click to select it. Click "Delete" at the bottom of the box.
•
Defining a Control Panel - In the middle of this screen you will see a spreadsheet format table,
Figure 5-31, with an entry for each PNet panel in the system. Anytime a panel entry in the
listing window is highlighted, a graphic image of that panel type is displayed at the top of the
Proprietary Information of PESA
S
CREEN
Figure 5-30 Panels Configuration Screen
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
5-45