Ssc3 Control Menu; Matrix Preset; Figure 5-15 Matrix Preset - PESA Cougar 3 User Manual

•
Serial Number – Displays the serial number of the controller device installed in the indicated
position.
•
MAC Address – Identifies assigned MAC address for module.
•
Main Application – Indicates revision level of main program firmware loaded into controller.
•
Power Supply – Displays the status of the power supply device contained on the indicated
controller module.
•
Fan – Indicates current status of cooling fan on-board the indicated controller module.
5.12 SSC3 C
ONTROL
Commands and screens contained under the SSC3 Control parent header in the Menu Tree allow you to
monitor status and issue direct control commands to certain functions of the system controller.
5.12.1 M P
ATRIX RESET
The Matrix Preset screen, Figure 5-15, allows you to preset switches for any valid destination and
source pairing in the system. Preset switches can be taken simultaneously, or selectively, directly from
this menu screen.
Proprietary Information of PESA
M
ENU
Figure 5-15 Matrix Preset Display
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
5-17