Source-Destination (Dest) Blocks Configuration Screen; Figure 5-26 Source -D; Onfiguration Creen - PESA Cougar 3 User Manual

5.15.6 S -D
OURCE ESTINATION
When the Source-Dest Blocks menu entry is selected, the configuration screen, as shown by Figure 5-
26, is displayed. From this screen you can selectively block any source group from being switched to a
designated destination group. The box labeled Blocks on the left side of the display window contains a
listing of destinations with at least one source block assignment; and the box labeled Information on the
right side contains the data entry cells used to create new or modify existing source block assignments.
Note the Information block has three areas:
•
Destination Name – This is a pull-down listing of all destinations in the configuration,
identified by name, as shown in the illustration below. To select a destination to which you wish
to apply a source block, open the listing with the arrow icon, and select the destination name
from the list.
•
Blocked Sources – Sources you wish to block from access by the named destination are listed
in this column.
•
Available Sources – This column contains a listing of all the sources which may be switched to
the named destination.
Proprietary Information of PESA
(D ) B C
EST LOCKS
Figure 5-26 Source-Destination Block Display
Publication 81-9059-0660-0, Rev. B
S
ONFIGURATION CREEN
C 3 V R
OUGAR IDEO OUTER
March 2011
5-39