Figure 5-24 Sourcesc - PESA Cougar 3 User Manual

•
Number - The left-most column is labeled NUMBER, is numerically sequential and
automatically filled in as source groups are added. You can not change the entry in the Number
column.
•
Name, Panel Name and Long Name - The next three columns allow you to assign identifying
names and/or acronyms to each source group according to the following formats:
Name – Any combination of up to 8 alphanumeric characters may be used to identify the
-
source group.
Panel Name - Any combination of up to 8 alphanumeric characters may be used to identify
-
the group. The entry made in this column is the text string that will appear in the switching
level columns on the Matrix Status display screen.
Long Name – This column is essentially a free text space where you may enter a name up
-
to 32 characters in length for the source. This name is only displayed on this configuration
screen and may be used to more clearly identify an external device or system.
•
Switching Levels - To the right side of the three name columns you will see columns
corresponding to each system switching level. The numerical entry in the columns on each row
assigns the physical input to the router associated with the source group for that switching level.
For example, look at entry number 2 in Figure 5-24 labeled IN2. Notice that the numeric entry
for IN2 in the VIDEO column is a 2. This entry tells the system controller that the video signal
associated with the source group identified as IN2 will be present at physical input (BNC)
number 2 of the Cougar3 video router.
Proprietary Information of PESA
Figure 5-24 Sources Configuration Screen
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
5-32