Ssc3 Information Screen; Figure 5-14 Examplei - PESA Cougar 3 User Manual

•
Upload From Controller – Reads and opens the configuration file currently stored in system
controller memory.
•
Online Update – If the GUI is actively connected to the system controller, checking this
selection activates the online update function. Refer to Paragraph 5.16 of this User Guide.
•
Save To File - Saves the current configuration under a filename of your choosing.
•
Load From File – Allows you to load a saved configuration file from media such as a hard
drive or thumb drive for review or modification. Anytime a saved file is loaded as the currently
displayed configuration file, a check mark appears in the small box beside the Load from File
command entry as a visual indication that the displayed file is not the currently active controller
file.
5.11.2 SSC3 I
NFORMATION
When the SSC3 Information entry is selected from the menu tree, the screen shown by Figure 5-14
displays the following status information for controllers present in the video frame.
•
Type – Identifies the controller as a small-scale controller device for a Cougar3 router frame.
•
Mode – If a redundant controller is installed, this entry identifies whether the indicated
controller device is currently functioning as the active or standby device for the frame.
•
IP Address – Displays the IP address assigned to the indicated small scale controller device.
The Primary controller assumes the base IP address assigned to the router and the Redundant
controller, if present, assumes the IP address of base IP + 1.
Proprietary Information of PESA
S
CREEN
Figure 5-14 Example Information Display Screen
C 3 V
OUGAR
Publication 81-9059-0660-0, Rev. B
R
IDEO OUTER
March 2011
5-16