Table of Contents
Advertisement
Digital Video
2.13Rear Panel Connectors Continued:
2
INSTALLATION
page 2.12
Installation
Control (PRC) Connectors (J15 and J93)
J15 provides for the connection of an optional external controller to the
Cougar Digital Video Routing Switcher. J93 provides for the connection of
additional Cougar Digital Video Routing Switchers to form up to a 64X64
switching matrix. Both of the control connectors allow for the bi-directional
transmission of data.
The pinout of control connector J15 is as follows:
PIN NO.
1
2
3
4
5
6
7
8
9
The pinout of control connector J93 is as follows:
PIN NO.
1
2
3
4
5
For PRC communications, the user should use a direct pin-for-pin cable
for interfacing between the System Controller and the peripheral equip-
ment. DO NOT use a "NULL MODEM" cable.
CPU Alarm Connector (J16)
Not used.
Section 2
DESCRIPTION
GROUND
RX+ DATA
TX- DATA
GROUND
SPARE
GROUND
RX- DATA
TX+ DATA
GROUND
DESCRIPTION
TX+ DATA
TX- DATA
GROUND
RX+ DATA
RX- DATA
P/N 81905903440
10/95
Advertisement
Table of Contents
