Transferring The Ups Between Modes; Transferring From Normal To Bypass Mode; Transferring From Bypass To Normal Mode; Retrieving The Alarm History - Eaton 9910 User Manual

Transferring the UPS between Modes

Retrieving the Alarm History

(6000 VA models only) You can transfer the UPS between Normal and
Bypass modes.

Transferring from Normal to Bypass Mode

To transfer from Normal to Bypass mode:
1. From the main menu, press the down (
Control menu, and press the OK button.
2. Press the down ( B
OK button. The screen displays Manual Bypass Command Sent.

Transferring from Bypass to Normal Mode

To transfer from Bypass to Normal mode:
1. From the main menu, press the down (
Control menu, and press the OK button.
2. Press the down ( B
OK button. The screen displays Normal Mode Command Sent.
To retrieve the alarm history through the display:
1. From the main menu, press the down (
Alarm History menu, and press the OK button.
2. Press the down ( B
notices, and alarms.
3. Press the escape (X) button to return to the previous menu.
Eaton 9910 UPS and EBM User's Guide
B
) button to scroll to Go to Bypass, and press the
B
) button to scroll to Go to Normal, and press the
B
) button to scroll through the listed events,
OPERATION
) button to scroll to the
) button to scroll to the
) button to scroll to the
S
P-164000005 Rev 2
29