Introduction; Features - Eaton 9910 User Manual

Chapter 1

Features

Introduction

The Eaton 9910 uninterruptible power supply (UPS) is designed to
®
prevent blackouts, brownouts, sags, and surges from reaching your
servers and other valuable electronic equipment. The UPS filters small
utility line fluctuations and isolates your equipment from large
disturbances by internally disconnecting from the utility line. The UPS
provides continuous power from its internal battery until the utility line
returns to safe levels or the battery is fully discharged.
Providing outstanding performance and reliability, the Eaton 9910's
unique benefits include the following:
S
ABM technology that uses advanced battery management to
®
increase battery service life, optimize recharge time, and provide a
warning before the end of useful battery life.
S
Extended runtime with an optional Extended Battery Module (EBM).
S
Start‐on‐battery capability for powering up the UPS even if utility
power is not available.
S
Hot‐swappable batteries that simplify maintenance by allowing you to
replace them safely without powering down the critical load.
S
Emergency shutdown control through the remote emergency
power-off (REPO) port.
S
A standard USB port and RS-232 port.
S
A communication bay for optional cards (Network Management Card
or Relay-Serial Card) with enhanced communication capabilities for
increased power protection and control.
S
Advanced power management software for graceful shutdowns and
power monitoring.
S
Sequential shutdown and load management through separate
receptacle groups, called load segments.
S
Backed by worldwide agency approvals.
Eaton 9910 UPS and EBM User's Guide
S
P-164000005 Rev 2
1