Accessing Alarms And Conditions; System Status Menu - Eaton 9910 User Manual

TROUBLESHOOTING

Accessing Alarms and Conditions

58
Eaton 9910 UPS and EBM User's Guide
The control panel provides troubleshooting information from two main
menus on the display:
S
System Status: Access to all active alarms and battery data
S
Alarm History: Access to the most recent 50 events, which might
include active and closed alarms
You can also access the UPS alarm history through a serial cable
connected to a computer.

System Status Menu

From the System Status menu, you can access the following screens for
troubleshooting information:
S
Status summary: The status summary screen provides information
about both mode and load. When there is an active notice or alarm,
the UPS automatically displays the active alarms screen and flashes
the display.
S
Notice or alarm: A separate screen displays for each active notice or
alarm. If there are no active alarms or notices, the message No Active
Alarms is displayed.
S
Battery status: The battery status screen indicates the battery charge
mode, the percentage that the battery is charged, and the runtime
with the present load level.
NOTE When an alarm is active, the control panel automatically displays an active alarm
screen unless you enable the screen lock feature.
To access troubleshooting information by using the System Status
menu:
1. While the main menu is displayed, press the down (
scroll to the System Status menu, and press the OK button.
2. Press the down ( B
alarm screens, and then the battery status screens.
S
P-164000005 Rev 2
) button to scroll through the active notice and
B ) button to