Maintenance; Maintenance Performed Prior To Every Use; Clean The Exterior - level 1 H-1200 115V Operator's Manual

S E C T I O N 1 2

Maintenance

Only competent personnel should perform any routine maintenance and
repairs to the Level 1 ® H-1200 Fast Flow Fluid Warmer (Fluid Warmer).
Maintenance is scheduled prior to each use, every 30 days, and annually. The
tasks are detailed below.
Note: If distilled water is used as the recirculating solution, change the
solution every 30 days. If a 0.3% hydrogen peroxide/distilled water
solution is used as the recirculating solution, change the solution
every 12 months, and during the 12 month period, always refill the
reservoir with a 0.3% hydrogen peroxide/distilled water solution.

Maintenance Performed Prior to Every Use

Clean and inspect the Fluid Warmer with Air Detector/Clamp and
Pressure Chambers after each use.

Clean the Exterior

Clean the entire Fluid Warmer after every use.
Never use organic solvents (e.g., acetone), strong acids, or
Note:
bases to clean any portion of the Fluid Warmer.
Do not place the Fluid Warmer directly under a faucet or
Note:
use a faucet sprayer to rinse. Never spray cleaning or other fluids
into openings on the Fluid Warmer or into the external connectors.
1 Unplug the Fluid Warmer before servicing.
2 Visually inspect the Fluid Warmer to ensure there is no visible
damage or deterioration of the enclosure such as cracks, or
deterioration of the labels and power cord. Do not clean if there
is a defect. Contact Smiths Medical or your local Smiths
Medical distributor.
3 Immerse a soft cloth or sponge as an applicator into the
cleaning solution consisting of mild liquid detergent soap and
warm tap water mixture. Squeeze out excess solution so that the
applicator is not dripping. Wipe or scrub the entire surface of
the enclosure and control panels. Use a soft brush to clean the
power cord if necessary.
S E C T I O N 1 2 • M a i n t e n a n c e
| Operator's Manual
59