S E C T I O N 8 • O p e r a t i o n
Modes of Operation
If any visual indicator does not illuminate or the audible signal
does not sound, do not use the Fluid Warmer. Remove the
device from service immediately. Death or serious injury may
occur to the patient or user if this warning is not followed.
OFF Mode
Power is off only for a part of the equipment. The MAINS are still
connected. Press the OFF button (
turn the device off.
ON/Automatic Operation Mode for Fluid Warmer
The Fluid Warmer enters Automatic Operating mode when a
Disposable Set is properly installed and the device is turned ON. This is
done by pressing the ON button (
Mode characteristics
• The green Automatic Operating LED on the Display Panel
illuminates (
).
c
• Fluid warming begins.
• Pressure infusion is provided by activating the Pressure Chambers.
• Air Detector/Clamp enters the Power ON Test, then enters default
Automatic Operation mode.
30
WARNING!
) on the Power and Control Panel to
a
).
b
| Operator's Manual
a
b
c