Switch Setting For Intelligent Function Module - Mitsubishi q64rd User Manual

4 SETUP AND PROCEDURES BEFORE OPERATION

4.5 Switch Setting for Intelligent Function Module

Measurement range setting
Switch 1
CH4 CH3 CH2 CH1
Offset/gain setting
Switch 2
CH4 CH3 CH2 CH1
Wiring type setting
Switch 3
CH4 CH3 CH2 CH1
Switch 4
Switch 5
1 The setting range 0 to 3 is available for the Q64RD/Q64RD-G. Setting of 4, 5 and 8 is available for the Q64RD-G only.
Setting other than these setting values will output an error. For details, check the error code.
2 The same operation is activated with any value within the setting range. For the range of 1 to F
4 - 7
The settings for the intelligent function module are performed using the I/O assignment
settings for GX Developer.
(1) Setting item
The intelligent function module switches consist of switches 1 to 5 and are set
using 16 bit data. When the intelligent function module switches are not set, the
default value for switches 1 to 5 is 0.
H
H
H
H
0 : Normal mode (temperature conversion processing)
H
1 to F *2: Offset/gain setting mode
H
Setting Item
Measurement mode Measurement range
New JIS
(Pt 100)
Old JIS
(JPt100)
Ni100
Offset/gain setting
Factory default
User range setting
Wiring type setting
3-wire type
4-wire type
0: Fixed
MELSEC-Q
Set value 1
-200 to 850
-20 to 120
0 to 200
-180 to 600
-20 to 120
0 to 200
-60 to 180
Set value
Set value
, for example, set 1.
H
0
1
4
2
3
5
8
0
1
0
1
4 - 7